Events

Date Wednesday, Oct 30, 2019

Location 359 Terry Fox Drive, Kanata, Ontario

Agenda

       11:30 AM – 12:00 PM: Light Lunch and Networking

       12:00 PM – 1:00 PM  : Presentation and Q&A

1:00 PM – 1:30 PM    : Post Presentation Networking

Title of the Talk AI-Powered 5G Networks
& Beyond

Speaker  Hatem Abou-zeid 

Summary

5G Networks are anticipated
to transform modern societies by providing an ultra-reliable, high-speed
communications infrastructure that will connect billions of devices including
vehicles, machines, and sensors. Both the complexity of such networks and the
diversity of application requirements will be unprecedented. This mandates
novel, autonomous network configuration and operation that can anticipate and
react to changes in traffic, topology, and interference conditions to ensure
seamless quality of experience and reliability. In this talk I will discuss
AI-driven networking use-cases elaborating on the practical challenges of
industrial deployments. I will then highlight directions where research is
needed to further expedite and facilitate the development of AI-powered
networks.

Biography

Hatem Abou-zeid is a
Senior 5G Systems Designer at Ericsson Canada where he drives research and
system development for 5G radio access networks. Prior to that he held
industrial positions at CISCO Systems and Bell Labs in addition to postdoctoral
and research assistant affiliations at Queen’s University, Canada. His research
focuses on the application of machine learning in 5G networks with particular
emphasis on anticipatory and adaptive algorithms drawing on methods from
reinforcement learning, spatio-temporal forecasting, deep learning and
stochastic optimization. Dr. Abou-zeid is very passionate about developing
strong industry-university collaborations that foster applied, innovative
research, and he leads multiple academic partnerships on intelligence and
analytics in future networks.

IEEE  Distinguished Lecturer Presentation hosted jointly by the IEEE Ottawa EMC and CASS/SSCS/EDS Chapters:

Speaker  :     Dr. Marcos Rubinstein, Professor, University of Applied Sciences of Western Switzerland

Topic    :     The Lightning Phenomenon

Date     :     Tuesday October 22, 2019

Time     :     12(noon) – 1pm

Location :     4124-ME (Meckenzie Building), Carleton University, 1125 Colonel By Drive, Ottawa – K1S5B6

Registration:  Free, Please E-mail Ram Achar (achar@doe.carleton.ca)

Refreshments: Served

Parking  : Payment based Metered Parking spots in the campus

Organizers:

               Ram Achar, Dept. of Electronics, Carleton University

               Chairman CASS/SSCS/EDS Chapters

               achar@doe.carleton.ca

               Dr. Syed Bokhari, Chairman, IEEE Ottawa EMC chapter

Abstract

Lightning is one of the primary causes of damage and malfunction of telecommunication and power networks and one of the leading causes of weather-related deaths and injuries.

Lightning is composed of numerous physical processes, of which only a few are visible to the naked eye.

This lecture presents various aspects of the lightning phenomenon, its main processes and the technologies that have been developed to assess the parameters that are important for engineering and scientific applications. These parameters include the channel-base current and its associated electromagnetic fields.

The measurement techniques for these parameters are intrinsically difficult due to the randomness of the phenomenon and to the harsh electromagnetic environment created by the lightning itself.

Besides the measurement of the lightning parameters, warning and insurance applications require the real-time detection and location of the lightning strike point. The main classical and emerging lightning detection and location techniques, including those used in currently available commercial lightning location systems will be described in the lecture. The newly proposed Electromagnetic Time Reversal technique, which has the potential to revolutionize lightning location will also be presented.

Biography

Marcos Rubinstein received the Master’s and Ph.D. degrees in electrical engineering from the University of Florida, Gainesville.

In the decade of the 1990’s, he worked as a research engineer at the Swiss Federal Institute of Technology, Lausanne and as a program manager at Swisscom in the areas of electromagnetic compatibility and lightning. Since 2001, he is a professor at the University of Applied Sciences of Western Switzerland HES-SO, Yverdon-les-Bains, where he is currently responsible for the advanced Communication Technologies Group. He is the author or coauthor of 300 scientific publications in reviewed journals and international conferences. He is also the coauthor of nine book chapters and the co-editor of a book on time reversal. He served as the Editor-in-Chief of the Open Atmospheric Science Journal, and currently serves as an Associate Editor of the IEEE Transactions on EMC.

Prof. Rubinstein received the best Master’s Thesis award from the University of Florida, the IEEE achievement award and he is a co-recipient of the NASA’s Recognition for Innovative Technological Work award. He also received the ICLP Karl Berger award. He is a Fellow of the IEEE and an EMP Fellow, a member of the Swiss Academy of Sciences and of the International Union of Radio Science.

IEEE Photonics Society Distinguished Lecturer Program

Advanced semiconductor lasers:Ultra-low operating energy and heterogeneous integration with Si photonics devices

Shinji Matsuo, NTT Photonics Laboratories, Japan

Abstract: The electrical power consumed in data transmission systems is now hampering efforts to further increase the speed and capacity at various scales, ranging from data centers to microprocessors. Optical interconnects employing an ultralow energy directly modulated lasers will play a key role in reducing the power consumption. Since a laser’s operating energy is proportional to the size of its active volume, developing high-performance lasers with a small cavity is important. For this purpose, we have developed membrane DFB and photonic crystal (PhC) lasers, in which active regions are buried with InP layer. Thanks to the reduction of cavity size and the increase in optical confinement factor, we have achieved extremely small operating energy and demonstrated 4.4-fJ/bit operating energy by employing wavelength-scale PhC cavity. Reduction of the cost is also important issue because huge number of transmitters are required for short distance optical links. For this purpose, Si photonics technology is expected to be a potential solution because it can provide large-scale phonic integrated circuits (PICs), which can reduce the assembly cost compared with transmitters constructed by discrete devices. Therefore, heterogeneous integration of III-V compound semiconductors and Si has attracted much attention. For fabricating these devices, we have developed wafer-scale fabrication procedure that employs regrowth of III-V compound semiconductors on directly bonded thin InP template on SiO2/Si substrate. A key to realize high-quality epitaxial layer is total thickness, which must be below the critical thickness, typically 430 nm. Thus, membrane structure is quite suitable for heterogeneous integration. I will talk about our recent progress, focusing on ultralow-powerconsumption directly modulated lasers and their photonic integrated circuit. I will also describe progress in heterogeneous integration of these lasers and Si photonics devices.

Bio: Dr. Matsuo received a B.E. and M.E. degrees in electrical engineering from Hiroshima University, Hiroshima, Japan, in 1986 and 1988, and the Ph.D. degree in electronics and applied physics from Tokyo Institute of Technology, Tokyo, Japan, in 2008. In 1988, he joined NTT Optoelectronics Laboratories, Atsugi, where he was engaged in research on photonic functional devices using MQW-pin modulators and VCSELs. In 1997, he researched optical networks using WDM technologies at NTT Network Innovation Laboratories, Yokosuka. Since 2000, he has been researching InP-based photonic integrated circuits including fast tunable lasers and photonic crystal lasers at NTT Photonics Laboratories, Atsugi. Dr. Matsuo is a member of the IEEE Photonics Society, Japan Society of Applied Physics and the Institute of Electronics, Information and Communication Engineers (IEICE) of Japan.

A joint event by IEEE YP & WIE Ottawa!

REGISTER NOW: https://forms.gle/ymzcQyp24vNJhx8K8

WHO? Representatives from Professional Engineers Ontario
WHAT? Clarifying the Path to becoming a P.Eng.

If
you are an engineering undergraduate or post-graduate student, or a
recent graduate starting out your engineering career, then this seminar
might be for you. In it you will learn:

• What is PEO?
• What engineering experience is PEO looking for once I graduate?
• I have international engineering education and experience; how is that evaluated by PEO?
• How is my engineering experience evaluated by PEO?
• How do I prepare my Experience Record?
• What is the PPE?
• What is the EIT Program and the Student Membership program?

WHERE?
Carleton University,
Minto Centre (MC) 5050
Paid Parking Available – carleton.ca/parking/parking-map/

WHEN?
Thursday, February 27th, 2020
6:00PM to 7:30PM

Free for all – You MUST pre-register!
REGISTER NOW: https://forms.gle/ymzcQyp24vNJhx8K8

Speaker: Suzanne
Grant of Canadian Advanced Technology Alliance

_{Topic: #TechnologyNorth – the gold standard}

Suzanne envisions a world where a Made in Canada #TechnologyNorth seal is the global gold standard of quality, synonymous with leather shoes Made in Italy, grapes harvested in Champagne, and autos designed and manufactured in Germany. Canada’s world class innovators have delivered excellence decade over decade. Without adequate support of the sector through COVID19, this vision may be a non-starter. During economic difficulties Canada has traditionally bailed out traditional auto and airline industries, and innovative technologies like the AVRO Arrow, Nortel, Research In Motion, Cognos and aspiring young companies were orphaned. By failing to protect our  innovators, Canada traded in future traction of Canada’s valuable intellectual property. America, Europe and the Middle East hungry to prosper from our bargain IP and talent came out the winners. Each downturn has taken at least a decade for technology to reinvent itself and rebound.

We have a track record of great beginnings and a more mature Canada can weather the storms and aim for bigger commercial finish lines, where prosperity and job abundance translate to big returns. Before COVID19 struck, we were hitting our stride with record venture investments and sought after talent from leading education institutions. Canada’s Innovation Agenda demonstrated a maturing future view aiming to lead. This is no time to retreat! The government has invested on behalf of Canadians and accountable for a $36B year over year injection into innovation via universities and commercialization. This investment is at risk. Toronto was the fastest growing tech hub in North America with ICT and advanced technologies outpacing job and economic growth rates by almost twice the national average. As we look beyond COVID19, our technology sector, adequately supported through this crisis, can be the catalyst to jump start Canada’s future economy. With a troubled oil and gas sector, Canada will need agile, fast movers doing the heavy lifting to fund our social, health and education programs and rebuild the nation’s balance sheet.

And as we get back to shipping products and services, a more sophisticated approach to sales, branding, advocacy and public relations, layered with Canada’s science, technology, engineering and maths genius can place Canada out in front in multiple lanes. The digitization revolution just got a bump up and opportunities and demand will remain for trillion dollar market frontiers. Data, Internet of things and machine learning are golden.  Demand for artificial intelligence, environmental, medical and space solutions will continue to accelerate. Winning the future will take more collaboration, agility, commercial savvy and embracing diverse talent sets and creativity. We’ve got this Canada!

About The Canadian Advanced Technology Alliance
CATA is a trusted industry alliance with a mandate to help Canadian innovation thrive. They focus on commercial capabilities and market access for Canadian HQ small and medium technology businesses. The alliance brings together industry thought leaders with academe and policy makers to advocate for Canadian competitiveness. CATA amplifies a bold, confident podium culture amongst Canadian innovators. CATA recently proposed $3.6B in COVID emergency relief – the Resilience and Rebound Fund for tech small and medium companies.
CATA is home to the National Innovation Leadership Council, and a joint body with the Canadian Association of Chiefs of Police – the CACP/CATA E-Crimes Cyber Council. CATA is launching a President’s Council this Fall