Events

Mar
19
Thu
[CANCELLED] Seminar: Drone-assisted Mobile Edge Computing
Mar 19 @ 18:00 – 19:30

NOTE: This event as been cancelled due to COVID-19 precautions

Seminar presented by the IEEE Ottawa Section, Communications Society, Consumer Electronics Society, and
Broadcast Technology Society Joint Chapter (ComSoc/CESoc/BTS), Instrumentation & Measurement
Society Chapter (IMS), Reliability Society and Power Electronics Society Joint Chapter (RS/PELS), IEEE
Ottawa Educational Activities (EA) and Algonquin College IEEE Student Branch:

 

IEEE Ottawa Section is inviting all interested IEEE members and nonmembers to a distinguished Lecture:
Drone-assisted Mobile Edge Computing

By

Nirwan Ansari, Distinguished Professor of Electrical and Computer Engineering at

the New Jersey Institute of Technology (NJIT)

 

DATE:

Thursday, March 19, 2020.

 

TIME:

Refreshments, Registration and Networking: 6:00 p.m.; Seminar: 6:30 p.m. – 7:30 p.m.

PLACE:

Ciena Optophotonics Lab, Room T129, T-Building, School of Advanced Technology, Algonquin College,

1385 Woodroffe Ave., Ottawa, ON Canada K2G 1V8.

 

PARKING:

Parking at Lots 8 and 9 after 5 p.m. is $5 flat rate, pay at a machine and display the ticket on your dashboard. Please respect restricted areas.

 

ADMISSION:

Free. Registration required. To ensure a seat, please register by e-mail contacting: Wahab Almuhtadi.

 

MORE INFO:

Ottawa ComSoc/CESoc/BTS Chapter website.

 

Abstract:

In mobile access networks, different types of Internet of Things (IoT) devices (e.g., sensor nodes and smartphones) will generate vast traffic demands, thus dramatically increasing the traffic loads of their connected access nodes, especially in the 5G era. Mobile edge computing enables data collected by IoT devices to be stored in and processed by local fog nodes as well as allows IoT users to access IoT applications via these nodes at the same time. In this case, the communications latency critically affects the response time of IoT user requests. Owing to the dynamic distribution of IoT users, drone base station (DBS), which can be flexibly deployed over hotspot areas, can potentially improve the wireless latency of IoT users by mitigating the heavy traffic loads of macro BSs. Drone-based communications poses two major challenges: 1) DBS should be deployed in suitable areas with heavy traffic demands to serve more users; 2) traffic loads in the network should be allocated among macro BSs and DBSs to avoid instigating traffic congestions. Therefore, we propose a TrAffic Load balancing (TALL) scheme in such drone-assisted fog network to minimize the wireless latency of IoT users. In the scheme, we divide the problem into two sub-problems and design two algorithms to optimize the DBS placement and user association, respectively. Extensive simulations have been set up to validate the performance of TALL.

 

Speaker Bio:

Dr. Nirwan Ansari, Distinguished Professor of Electrical and Computer Engineering at the New Jersey Institute of Technology (NJIT), received his Ph.D. from Purdue University, MSEE from the University of Michigan, and BSEE (summa cum laude with a perfect GPA) from NJIT. He is a Fellow of IEEE and a Fellow of National Academy of Inventors.

He authored Green Mobile Networks: A Networking Perspective (Wiley-IEEE, 2017) with T. Han, and coauthored two other books. He has also (co-)authored more than 600 technical publications. He has guest-edited a number of special issues covering various emerging topics in communications and networking. He has served on the editorial/advisory board of over ten journals including as Associate Editor-in-Chief of IEEE Wireless Communications Magazine. His current research focuses on green communications and networking, cloud computing, droneassisted networking, and various aspects of broadband networks. He was elected to serve in the IEEE Communications Society (ComSoc) Board of Governors as a member-at-large, has chaired some ComSoc technical and steering committees, is current Director of ComSoc Educational Services Board, has been serving in many committees such as the IEEE Fellow Committee, and has been actively organizing numerous IEEE International Conferences/Symposia/Workshops. He is frequently invited to deliver keynote addresses, distinguished lectures, tutorials, and invited talks. Some of his recognitions include several excellence in teaching awards, a few best paper awards, the NCE Excellence in Research Award, several ComSoc TC technical recognition awards, the NJ Inventors Hall of Fame Inventor of the Year Award, the Thomas Alva Edison Patent Award, Purdue University Outstanding Electrical and Computer Engineering Award, the NCE 100 Medal, and designation as a COMSOC Distinguished Lecturer. He has also been granted more than 40 U.S. patents.

May
26
Tue
Clarifying the Path to becoming a Professional Engineer
May 26 @ 12:00 – 14:00
Clarifying the Path to becoming a Professional Engineer

In this time of social distancing, we are pleased to announce that all the team members of IEEE YP and WIE Ottawa Sections are fully committed to providing online interaction and support to our community! In partnership with Professional Engineers Ontario, we present an online talk in “Clarifying the Path to Becoming a Professional Engineer.”

If you are an engineering undergraduate or post-graduate student, or a recent graduate starting out your engineering career, then this seminar might be for you. In it you will learn:

  • What is PEO?
  • What engineering experience is PEO looking for once I graduate?
  • I have international engineering education and experience; how is that evaluated by PEO?
  • How is my engineering experience evaluated by PEO?
  • How do I prepare my Experience Record?
  • What is the PPE?
  • What is the EIT Program and the Student Membership Program?

The emphasis of this webinar will be on the P. Eng. licensure process – what PEO is looking for. The webinar will focus on how engineering experience is evaluated and how you can facilitate the process. Learn the dos and don’ts of preparing your licensing application for evaluation.

To participate, you will require: internet connection to view the webinar, phone access to dial into the conference for audio.

We look forward to speaking with you!

Jul
7
Tue
A Novel Maximum Power Point Tracking (MPPT) Technique for Photovoltaic Solar Panels
Jul 7 @ 18:00 – 19:30
A Novel Maximum Power Point Tracking (MPPT) Technique for Photovoltaic Solar Panels

The IEEE Reliability Society & Power Electronics
Society is inviting all interested IEEE members and prospective members to a
webinar

 

A Novel Maximum Power Point Tracking (MPPT) Technique for Photovoltaic Solar Panels

By

 

Mahdi Ranjbar

DATE:       July 7, 2020

TIME:        18 19:30.

       

A
novel Maximum Power Point Tracking (MPPT) technique for photovoltaic (PV)
solar panels will be presented.  Current
sensors are costly components. They also require a signal conditioning
circuitry to reduce the noise and condition the signal to be sampled and used
by the controller.  Th
is
method takes advantage of the non-linearity of the I-V curve of the solar panel
to
find the MPP
. By injecting high-frequency perturbation signals and
monitoring the system behavior current sensing used for controlling of MPPT
is eliminated. This elimination can reduce the cost of MPPT circuitry. The proposed method also shows a very fast tracking response due to the use of high-frequency signals instead of relying on low frequency and DC signals which are used in the traditional methods. Numerical analysis, simulation results, and experimental results verify the feasibility of the proposed technique will be shown.

 

Mahdi
Tude Ranjbar received his bachelor’s degree from the University of Tehran,
Iran (2017). In this period, his main focus was on collaboration with different laboratories in ECE and Mechanical engineering departments. He started his M.A.Sc degree in 2018 at Queen’s, Canada with a focus on improving the efficiency of the solar system power generation techniques.  Since March 2020, Mr. Ranjbar has joined the System
Architecture group at HUADA Semiconductors where his main focus is designing power applications using Huada’s microcontrollers, gate drivers and current sense amplifiers.


Please
register here:
 https://events.vtools.ieee.org/tego_/event/manage/233724

A link will be sent to you a day before the event.

 

Sep
16
Wed
Opportunities, Challenges and Implementation of Silicon Integration and Packaging in mmWave Radar and Communication Applications
Sep 16 @ 17:00 – 18:00
Opportunities, Challenges and Implementation of Silicon Integration and Packaging in mmWave Radar and Communication                Applications

IEEE Distinguished Lecturer Presentation hosted jointly by the OTTAWA EMC/CPMT/ED/CAS/SSCS/AP/MTT Chapters:

Speaker : Dr. Xiaoxiong Gu, IBM T.J. Watson Research Center, NY
Topic : Opportunities, Challenges and Implementation of Silicon Integration and Packaging in mmWave Radar and Communication Applications
Date : Wednesday September 16, 2020
Time : 5:00 PM to 6:00 PM EST
Location : Online via ZOOM
Registration: Free, and is on a first to reply basis. Preference given to IEEE EMC CPMT/ED/CAS/SSCS/APS/MTT society members. E-mail Reservation is required.

Organizer: Dr. Syed Bokhari, Chairman, IEEE Ottawa EMC chapter
Syed.Bokhari@fidus.com,
Office :(613) 595 – 0507 Ext. 377, Cell: (613) 355 – 6632

Abstract: Co-design and integration of RFIC, package, and antennas are critical to enable multiple aspects of 5G communications (backhaul, last mile, mobile access) and are particularly challenging at mmWave frequencies. This talk will cover various important aspects of mmWave antenna module packaging and integration for base station, backhaul, and user equipment applications, respectively, with particular emphasis on signal, power and EMC integrity. We will first present a historical perspective on Si-based mmWave modules and approaches for antenna and IC integration including trade-offs. We will focus on the challenges, implementation, and characterization of a 28-GHz phased-array module with 64 dual polarized antennas for 5G base station applications. Second, we will present a W-band phased-array module with 64-element dual-polarization antennas for radar imaging and backhaul application. The module consists of a multilayer
organic chip-carrier package and a 16-element phased-array TX IC or a 32- element RX IC chipset. Third, we will describe a compact, low-power, 60-GHz switched-beam transceiver module suitable for handset integration incorporating four antennas that support both normal and end-fire directions for a wide link spatial coverage. Detailed signal, power and EMC modeling and analysis of the modules and the system are presented.

Speaker Bio:

Xiaoxiong Gu received the Ph.D. in electrical engineering from the University of Washington, Seattle, USA, in 2006. He joined IBM Research as a Research Staff Member in January 2007. His research activities are focused on 5G radio access technologies, optoelectronic and mm-wave packaging, electrical designs, modeling and characterization of communication, imaging radar and computation systems. He has recently worked on antenna-in-package design and integration for mm-wave imaging and communication systems including Ka-band, V-band and Wband phased-array modules. He has also worked on 3D electrical packaging and signal/power integrity analysis for high-speed I/O subsystems including onchip and off-chip interconnects. He has been involved in developing novel TSV
and interposer technologies for heterogeneous system integration.

Dr. Gu has authored over 90 peer-reviewed publications, 2 book chapters and holds 9 issued patents. He was a co-recipient of IEEE ISSCC 2017 Lewis Winner Award for Outstanding Paper and IEEE JSSC 2017 Best Paper Award (the world’s first reported silicon-based 5G mmWave phased array antenna module operating at 28GHz). He was a co-recipient of the 2017 Pat Goldberg Memorial Award to
the best paper in computer science, electrical engineering, and mathematics published by IBM Research. He received IBM Outstanding Research Accomplishment in 2019 and Outstanding Technical Achievement Award in 2016, four IBM Plateau Invention Awards in 2012 ~ 2016, the IEEE EMC Symposium Best Paper Award in 2013, two SRC Mahboob Khan Outstanding Industry Liaison Awards in 2012 and
2014, the Best Conference Paper Award at IEEE EPEPS in 2011, IEC DesignCon Paper Awards in 2008 and 2010, the Best Interactive Session Paper Award at IEEE DATE in 2008, and the Best Session Paper Award at IEEE ECTC in 2007. Dr. Gu is the co-chair of Professional Interest Community (PIC) on Computer System Designs at IBM. He is a Senior Member of IEEE and has been serving on different
program committees for MTT-S, EPEPS, ECTC, EDAPS and DesignCon. Dr. Gu was the General Chair of IEEE EPEPS 2018 in San Jose, CA. He is also a Distinguished Lecturer for IEEE EMC Society in 2019-2020 and is currently an Associate Editor for IEEE Transactions on Component, Packaging and Manufacturing Technology.

Oct
7
Wed
Antenna Arrays Seminar
Oct 7 @ 17:00 – 18:30
Antenna Arrays Seminar

Date: October 7th 2020

Time: 5:00 – 6:30 pm EDT

Venue: Online – http://bit.ly/DJKYPAAS

Event Contact: Daniel J King (danieljamesking3@gmail.com)

IEEE Ottawa Young Professional Affinity Group presents an Antenna Arrays Seminar by MASc. Daniel J. King. Feel free to register and join us in this exciting event. Some of the topics covered are:

  • A basic introduction to the theory and practice of antenna arrays;
  • Information about current research opportunities and applications;
  • Specific examples in mm-Wave applications!

Register today to this virtual event!

More info here: https://www.ieeeottawa.ca/wp-content/uploads/2020/09/antennas.pdf

IEEE Ottawa Section Logo

© Copyright 2020 IEEE – All rights reserved. Use of this website signifies your agreement to the IEEE Terms and Conditions.

A not-for-profit organization, IEEE is the world's largest technical professional organization dedicated to advancing technology for the benefit of humanity.