Title: 5G for Smart Everything: From Smart Meters to the New Power Grid. What is needed to get there ?
Speaker: Akshay Sharma, Executive Research Fellow, neXtCurve: www.next-curve.com
Date/Time: Tuesday, November 12, 2019, from 2 – 3 pm.
Abstract: This talk discusses how 5G with Edge Computing, and Ultra-low latency (sub-5ms) with Gigabit speed bandwidth will be a game changer with Smart Meters and a new Electric Grid can be enabled with Smart Lamposts. As we transition to DevOps, AIOps, newer Closed Loop Automation systems will occur. As we connect AI-powered Virtual Personal Assistants to IoT devices in the home, now we have to imagine the entire macro-infrastructures being all hyper-connected. What is needed to get there will be discussed at the seminar.
Speaker’s Bio: Akshay Sharma is originally from Ottawa, B. Eng Computer Systems Engineering from Carleton, a tech analyst, formerly from Gartner, having authored or co-authored over 280 research notes, on emerging technologies like SD-WAN, 5G, mobile video, cloud CDN, IoT, etc. in the past decade. A frequent speaker at tech events, he is often quoted in leading institutions like CNN, Wall St. Journal, etc. He is a former CTO of one of the first video/WiFi smartphone firms, former Chief Architect at Siemens Mobile, and has been given awards by the NJ IEEE Chapter on talks he gave on 5G and Cybersecurity. He is on the tech advisory board for 5G and DevOps startups: LB-N, Kovair, along with others. Mr Sharma’s recent publications include: Search Results for “akshay” – neXt Curve
NOTE: This event has been cancelled due to COVID-19 precautions
Due to the current situation regarding corrona virus COVID-19, we have to CANCEL our IEEE Ottawa Section Seminar:
“Microgrid Stability Definitions, Analysis, and Modeling”
by Dr. Mostafa Farrokhabadi,
which was scheduled for Tuesday, Mar. 17, 2020, 6:00 p.m., at Algonquin College, 1385 Woodroffe Ave., T-Building, Room T129.
The new date and time for this seminar will be determined and announced when the circumstances allow.
We are sorry for the inconvenience and thank you for your understanding.
TITLE: Microgrid Stability Definitions, Analysis, and Modeling
SPEAKER: Dr. Mostafa Farrokhabadi, Director of Technology at BluWave-ai, Ottawa
DATE: Tuesday, March 17, 2020.
TIME: Refreshments, Registration and Networking: 6:00 p.m.; Seminar: 6:30 p.m. – 7:30 p.m.
LOCATION: Ciena Optophotonics Lab, Room T129, T-Building, School of Advanced Technology, Algonquin College, 1385 Woodroffe Ave., Ottawa, ON Canada K2G 1V8.
PARKING: Parking at Lots 8 and 9 after 5 p.m. is $5 flat rate, pay at a machine and display the ticket on your dashboard. Please respect restricted areas.
Abstract: A microgrid is defined as a group of Distributed Energy Resources (DERs) and loads that act locally as a single controllable entity and can operate in both grid-connected and islanded modes. Microgrids are considered a critical link in the evolution from vertically integrated bulk power systems to smart decentralized networks, by facilitating the integration of DERs. Entities, such as government agencies, utilities, military bases, and universities around the world are deploying microgrids, and an increasing number of these systems are expected to be developed in the next decade. In general, stability in microgrids has been treated from the perspective of conventional bulk power systems. However, the nature of the stability problem and dynamic performance of a microgrid are considerably different than those of a conventional power system due to intrinsic differences between microgrids and bulk power systems, such as size, feeder types, high share of Renewable Energy Sources (RES), converter-interfaced components, low inertia, measurement devices such as Phase-Locked Loop (PLL), unbalanced operation, etc.
This seminar discusses the findings of the award-winning IEEE PES Task Force on Microgrid Stability Definitions, Analysis, and Modeling, which defines concepts and identifies relevant issues related to stability in microgrids. The seminar presents definitions and classification of microgrid stability, considering pertinent microgrid features such as voltage-frequency dependence, unbalancing, low inertia, and generation intermittency. A few examples will be also presented, highlighting some of the stability classes discussed during the seminar.
Speaker’s Bio: Dr. Mostafa Farrokhabadi is the Senior Director of Technology at BluWave-ai, an internationally award-winning startup offering AI-enabled control and optimization solutions for smart grids. He has more than 8 years of experience in designing mission critical grid solutions for industry and academia, including technical leadership of a $6M international consortium in Electric Grid Modernization, and Smart Grid projects with Hatch and Canadian Solar. Mostafa has authored/co-authored several high-impact technical papers and patents on intelligent control and optimization of renewable-penetrated grids.
Mostafa obtained his PhD in Electrical and Computer Engineering from the University of Waterloo. He has also studied and performed research in Sweden at KTH and Germany at KIT. During the course of his career, Mostafa has received multiple business, research, and teaching awards, including the prestigious University of Waterloo Doctoral Thesis Completion Award and Ottawa’s Forty Under 40.
Mostafa has also led the award-winning IEEE Power and Energy Society Task Force on microgrid stability, an international coalition of 21 researchers from 14 institutions investigating stability issues in microgrids. Currently, he serves as an Associate Editor of the IEEE Transactions on Smart Grid.
Admission: Free. Registration required. Please register by e-mail contacting: firstname.lastname@example.org or email@example.com.
NOTE: This event as been cancelled due to COVID-19 precautions
Seminar presented by the IEEE Ottawa Section, Communications Society, Consumer Electronics Society, and
Broadcast Technology Society Joint Chapter (ComSoc/CESoc/BTS), Instrumentation & Measurement
Society Chapter (IMS), Reliability Society and Power Electronics Society Joint Chapter (RS/PELS), IEEE
Ottawa Educational Activities (EA) and Algonquin College IEEE Student Branch:
IEEE Ottawa Section is inviting all interested IEEE members and nonmembers to a distinguished Lecture:
Drone-assisted Mobile Edge Computing
Nirwan Ansari, Distinguished Professor of Electrical and Computer Engineering at
the New Jersey Institute of Technology (NJIT)
Thursday, March 19, 2020.
Refreshments, Registration and Networking: 6:00 p.m.; Seminar: 6:30 p.m. – 7:30 p.m.
Ciena Optophotonics Lab, Room T129, T-Building, School of Advanced Technology, Algonquin College,
1385 Woodroffe Ave., Ottawa, ON Canada K2G 1V8.
Parking at Lots 8 and 9 after 5 p.m. is $5 flat rate, pay at a machine and display the ticket on your dashboard. Please respect restricted areas.
Free. Registration required. To ensure a seat, please register by e-mail contacting: Wahab Almuhtadi.
Ottawa ComSoc/CESoc/BTS Chapter website.
In mobile access networks, different types of Internet of Things (IoT) devices (e.g., sensor nodes and smartphones) will generate vast traffic demands, thus dramatically increasing the traffic loads of their connected access nodes, especially in the 5G era. Mobile edge computing enables data collected by IoT devices to be stored in and processed by local fog nodes as well as allows IoT users to access IoT applications via these nodes at the same time. In this case, the communications latency critically affects the response time of IoT user requests. Owing to the dynamic distribution of IoT users, drone base station (DBS), which can be flexibly deployed over hotspot areas, can potentially improve the wireless latency of IoT users by mitigating the heavy traffic loads of macro BSs. Drone-based communications poses two major challenges: 1) DBS should be deployed in suitable areas with heavy traffic demands to serve more users; 2) traffic loads in the network should be allocated among macro BSs and DBSs to avoid instigating traffic congestions. Therefore, we propose a TrAffic Load balancing (TALL) scheme in such drone-assisted fog network to minimize the wireless latency of IoT users. In the scheme, we divide the problem into two sub-problems and design two algorithms to optimize the DBS placement and user association, respectively. Extensive simulations have been set up to validate the performance of TALL.
Dr. Nirwan Ansari, Distinguished Professor of Electrical and Computer Engineering at the New Jersey Institute of Technology (NJIT), received his Ph.D. from Purdue University, MSEE from the University of Michigan, and BSEE (summa cum laude with a perfect GPA) from NJIT. He is a Fellow of IEEE and a Fellow of National Academy of Inventors.
He authored Green Mobile Networks: A Networking Perspective (Wiley-IEEE, 2017) with T. Han, and coauthored two other books. He has also (co-)authored more than 600 technical publications. He has guest-edited a number of special issues covering various emerging topics in communications and networking. He has served on the editorial/advisory board of over ten journals including as Associate Editor-in-Chief of IEEE Wireless Communications Magazine. His current research focuses on green communications and networking, cloud computing, droneassisted networking, and various aspects of broadband networks. He was elected to serve in the IEEE Communications Society (ComSoc) Board of Governors as a member-at-large, has chaired some ComSoc technical and steering committees, is current Director of ComSoc Educational Services Board, has been serving in many committees such as the IEEE Fellow Committee, and has been actively organizing numerous IEEE International Conferences/Symposia/Workshops. He is frequently invited to deliver keynote addresses, distinguished lectures, tutorials, and invited talks. Some of his recognitions include several excellence in teaching awards, a few best paper awards, the NCE Excellence in Research Award, several ComSoc TC technical recognition awards, the NJ Inventors Hall of Fame Inventor of the Year Award, the Thomas Alva Edison Patent Award, Purdue University Outstanding Electrical and Computer Engineering Award, the NCE 100 Medal, and designation as a COMSOC Distinguished Lecturer. He has also been granted more than 40 U.S. patents.
Presented by IEEE MTT-S Distinguished Microwave Lecturer (DML) Talks:
Transceiver Architectures for Beyond-5G: Challenges and R&D Opportunities, co-organized with SSC-S
Dr. Payam Heydari
University of California, Irvine
Date: Thursday, May 14 , 2020
Time: 12:00 PM – 1 PM
The ongoing super-linear growth of world’s population coupled with the worldwide access to internet and the general public’s tendency to use more bandwidth-intensive applications fuel the urgency to enhance wireless infrastructures so as to meet these demands. Consequently, the wireless R&D is headed towards the inception of “Beyond-5G” (e.g., 6G) technology. This webinar provides a comprehensive overview of challenges and opportunities in designing beyond-5G transceiver architectures capable of achieving high data rates above and beyond 20 Gbps.
Payam Heydari received his Ph.D. degree from the University of Southern California in 2001. He is currently a Full Professor of Electrical Engineering at the University of California, Irvine. Dr. Heydari’s research covers the design of terahertz/millimeter-wave/RF and analog integrated circuits. He is the (co)-author of two books, one book chapter, and more than 150 journal and conference papers.
Dr. Heydari is an AdCom member of the IEEE Solid-State Circuits Society. Dr. Heydari currently serves an Associate Editor for the IEEE Journal of Solid-State Circuits and the IEEE Solid-State Circuits Letters. He was a member of the Technical Program Committee of the International Solid-State Circuits Conference (ISSCC). Dr. Heydari is an IEEE Fellow for contributions to silicon-based millimeter-wave integrated circuits and systems.
Event is free, but space is limited. All participants must register in advance. For Registration: please use the following link
Presented by the IEEE Ottawa Section MTT-S/AP-S Chapter & Young Professionals
Accelerating 5G Design Innovation Through Simulation
Dr. Laila Salman
Date: Wednesday, June 10, 2020
Time: 2:30 PM – 4:00 PM
5G connectivity is the next technological revolution. This pervasive, ultrafast compute network will connect billions of devices with data on-demand. It will drive economic expansion in many sectors, spawn new products and services, and transform our lives as we know it. Yet, before 5G can deliver on its promises and quality of service (QoS) metrics, wireless systems designers and engineers must overcome sizable challenges.
Ansys 5G simulation solutions empower these individuals to solve the complexities impeding device, network and data center design. Ansys 5G simulation solutions provide electromagnetics, semiconductor, electronics cooling and mechanical analysis tools to accurately simulate 5G radio and related technologies. The multi-solution platform leverages high-performance computing that can be deployed across the enterprise, allowing designers and engineering experts to collaborate more effectively.
This seminar will highlight the following 5G engineering challenges:
· End User Equipment
o multi-frequency band antenna integration
o modeling of mm-wave array antennas
o RFI, EMI & Desense Mitigation
· Base-Station Antenna Modeling
o Full Communication Analysis in Electrically Large & Complex Environment
o RFI, Data Coverage & ElectroThermal Reliability
Dr. Laila Salman received the B.S. and M.S. degrees in electronics and communication engineering from Cairo University, Egypt, and the PhD. Degree in electromagnetic and antenna design from the University of Mississippi. She also worked as a post-doctoral student at the Université de Quebec en Outaouais, Gatineau, Canada till 2010. Her research was on dielectric resonator antennas, wearable antennas, microwave and millimeter-wave circuits and systems, microwave imaging for early detection of breast cancer and scattering from left-handed metamaterials. Dr. Salman joined Ansys Canada Ltd. in August 2010 as a Lead Technical Services Specialist for High Frequency Applications.
Registration: Please use the link in the registration section to sign up for the event.
To join event use the following link.