IEEE Photonics Society Distinguished Lecturer Program
Advanced semiconductor lasers:Ultra-low operating energy and heterogeneous integration with Si photonics devices
Shinji Matsuo, NTT Photonics Laboratories, Japan
Abstract: The electrical power consumed in data transmission systems is now hampering efforts to further increase the speed and capacity at various scales, ranging from data centers to microprocessors. Optical interconnects employing an ultralow energy directly modulated lasers will play a key role in reducing the power consumption. Since a laser’s operating energy is proportional to the size of its active volume, developing high-performance lasers with a small cavity is important. For this purpose, we have developed membrane DFB and photonic crystal (PhC) lasers, in which active regions are buried with InP layer. Thanks to the reduction of cavity size and the increase in optical confinement factor, we have achieved extremely small operating energy and demonstrated 4.4-fJ/bit operating energy by employing wavelength-scale PhC cavity. Reduction of the cost is also important issue because huge number of transmitters are required for short distance optical links. For this purpose, Si photonics technology is expected to be a potential solution because it can provide large-scale phonic integrated circuits (PICs), which can reduce the assembly cost compared with transmitters constructed by discrete devices. Therefore, heterogeneous integration of III-V compound semiconductors and Si has attracted much attention. For fabricating these devices, we have developed wafer-scale fabrication procedure that employs regrowth of III-V compound semiconductors on directly bonded thin InP template on SiO2/Si substrate. A key to realize high-quality epitaxial layer is total thickness, which must be below the critical thickness, typically 430 nm. Thus, membrane structure is quite suitable for heterogeneous integration. I will talk about our recent progress, focusing on ultralow-powerconsumption directly modulated lasers and their photonic integrated circuit. I will also describe progress in heterogeneous integration of these lasers and Si photonics devices.
Bio: Dr. Matsuo received a B.E. and M.E. degrees in electrical engineering from Hiroshima University, Hiroshima, Japan, in 1986 and 1988, and the Ph.D. degree in electronics and applied physics from Tokyo Institute of Technology, Tokyo, Japan, in 2008. In 1988, he joined NTT Optoelectronics Laboratories, Atsugi, where he was engaged in research on photonic functional devices using MQW-pin modulators and VCSELs. In 1997, he researched optical networks using WDM technologies at NTT Network Innovation Laboratories, Yokosuka. Since 2000, he has been researching InP-based photonic integrated circuits including fast tunable lasers and photonic crystal lasers at NTT Photonics Laboratories, Atsugi. Dr. Matsuo is a member of the IEEE Photonics Society, Japan Society of Applied Physics and the Institute of Electronics, Information and Communication Engineers (IEICE) of Japan.
A joint event by IEEE YP & WIE Ottawa!
REGISTER NOW: https://forms.gle/ymzcQyp24vNJhx8K8
WHO? Representatives from Professional Engineers Ontario
WHAT? Clarifying the Path to becoming a P.Eng.
you are an engineering undergraduate or post-graduate student, or a
recent graduate starting out your engineering career, then this seminar
might be for you. In it you will learn:
- What is PEO?
- What engineering experience is PEO looking for once I graduate?
- I have international engineering education and experience; how is that evaluated by PEO?
- How is my engineering experience evaluated by PEO?
- How do I prepare my Experience Record?
- What is the PPE?
- What is the EIT Program and the Student Membership program?
Minto Centre (MC) 5050
Paid Parking Available – carleton.ca/parking/parking-map/
Thursday, February 27th, 2020
6:00PM to 7:30PM
Free for all – You MUST pre-register!
REGISTER NOW: https://forms.gle/ymzcQyp24vNJhx8K8
Grant of Canadian Advanced Technology Alliance
Topic: #TechnologyNorth – the gold standard
Suzanne envisions a world where a Made in Canada #TechnologyNorth seal is the global gold standard of quality, synonymous with leather shoes Made in Italy, grapes harvested in Champagne, and autos designed and manufactured in Germany. Canada’s world class innovators have delivered excellence decade over decade. Without adequate support of the sector through COVID19, this vision may be a non-starter. During economic difficulties Canada has traditionally bailed out traditional auto and airline industries, and innovative technologies like the AVRO Arrow, Nortel, Research In Motion, Cognos and aspiring young companies were orphaned. By failing to protect our innovators, Canada traded in future traction of Canada’s valuable intellectual property. America, Europe and the Middle East hungry to prosper from our bargain IP and talent came out the winners. Each downturn has taken at least a decade for technology to reinvent itself and rebound.
We have a track record of great beginnings and a more mature Canada can weather the storms and aim for bigger commercial finish lines, where prosperity and job abundance translate to big returns. Before COVID19 struck, we were hitting our stride with record venture investments and sought after talent from leading education institutions. Canada’s Innovation Agenda demonstrated a maturing future view aiming to lead. This is no time to retreat! The government has invested on behalf of Canadians and accountable for a $36B year over year injection into innovation via universities and commercialization. This investment is at risk. Toronto was the fastest growing tech hub in North America with ICT and advanced technologies outpacing job and economic growth rates by almost twice the national average. As we look beyond COVID19, our technology sector, adequately supported through this crisis, can be the catalyst to jump start Canada’s future economy. With a troubled oil and gas sector, Canada will need agile, fast movers doing the heavy lifting to fund our social, health and education programs and rebuild the nation’s balance sheet.
And as we get back to shipping products and services, a more sophisticated approach to sales, branding, advocacy and public relations, layered with Canada’s science, technology, engineering and maths genius can place Canada out in front in multiple lanes. The digitization revolution just got a bump up and opportunities and demand will remain for trillion dollar market frontiers. Data, Internet of things and machine learning are golden. Demand for artificial intelligence, environmental, medical and space solutions will continue to accelerate. Winning the future will take more collaboration, agility, commercial savvy and embracing diverse talent sets and creativity. We’ve got this Canada!
About The Canadian Advanced Technology Alliance
CATA is a trusted industry alliance with a mandate to help Canadian innovation thrive. They focus on commercial capabilities and market access for Canadian HQ small and medium technology businesses. The alliance brings together industry thought leaders with academe and policy makers to advocate for Canadian competitiveness. CATA amplifies a bold, confident podium culture amongst Canadian innovators. CATA recently proposed $3.6B in COVID emergency relief – the Resilience and Rebound Fund for tech small and medium companies.
CATA is home to the National Innovation Leadership Council, and a joint body with the Canadian Association of Chiefs of Police – the CACP/CATA E-Crimes Cyber Council. CATA is launching a President’s Council this Fall
On behalf of the conference organizing committee,
we invite you to the virtual Photonics North Conference on May 26-28,
2020. In the midst of a global crisis,
we look forward to meeting with all of you, our colleagues, as we carry on with
the work of advancing optical science and engineering. Join us for outstanding
plenary talks from inspirational thought leaders. Join us for the very best
work from respected and established researchers. Join us for talks from
emerging researchers, presenting what is surely the opening work of brilliant,
Photonics and optics are finally seeing widespread adoption and significant growth into new markets. Photonic devices are being applied to sensing, communications, and even quantum computing. High speed fiber optics and highly integrated subsystems are essential to the rollout of 5G systems. There has never been a better time for research, development, and training in photonics and Photonics North is essential for developing and promoting the ecosystem.
President and CEO, CMC Microsystems
P. Scott Carney
The Institute of Optics, University of Rochester
IEEE CANADA TECHNOLOGY LEADERSHIP WEBINAR SERIES – III
Speaker: Tom Coughlin of IEEE USA
Topic: IEEE-USA Supports Public Policy For A Better World
IEEE-USA supports public policy and career and member services for IEEE members in the USA. This talk will include a brief discussion on what IEEE-USA does and will focus on its public policy activities to support future technologies, funding of science and technology, immigration policies that support a path to citizenship and support for engineers and technologists. I will also discuss the impact of the COVID-19 epidemic and what what IEEE and IEEE-USA is doing to help its members as well as society as a whole, to recover from this extraordinary event. This talk will include discussion of the future of work and the role of technology to enable remote work and new tools to work together in the real world even when we can’t be there physically.
Tom Coughlin, President, Coughlin Associates is a digital storage analyst and business and technology consultant. He has over 39 years in the data storage industry with engineering and management positions at several companies. Coughlin Associates consults, publishes books and market and technology reports (including The Media and Entertainment Storage Report and an Emerging Memory Report), and puts on digital storage-oriented events. He is a regular storage and memory contributor for forbes.com and M&E organization websites. He is an IEEE Fellow, Past-President of IEEE-USA and is active with SNIA and SMPTE. For more information on Tom Coughlin and his publications and activities go to www.tomcoughlin.com.